Billingham Drive Works Get a free quote

What a new drive costs in Billingham

Updated

The headline price per square metre is only part of the story. Digging out, the base, drainage and the crossing can move a quote by thousands, so it helps to know what is in a price before comparing two.

In short

On April 2026 UK averages, a new drive costs about £60 per m² for gravel, £90 for tarmac, £100 for block paving and £120 for resin-bound. A typical Billingham front drive of around 35m² is therefore roughly £2,100 to £4,200. Breaking out an old concrete drive, extra drainage and a new dropped kerb (about £1,800 on UK averages) are on top.

Here is a breakdown, with worked examples for common Billingham homes.

Free survey and written quote

Planning a drive in Billingham?

  • No charge and no obligation
  • One local installer, not a ring-round
  • Stockton-on-Tees rules explained
Get a free quote

Price per square metre

Surface UK average per m² 25m² 35m² 50m²
Gravel £60 £1,500 £2,100 £3,000
Tarmac £90 £2,250 £3,150 £4,500
Block paving £100 £2,500 £3,500 £5,000
Resin-bound £120 £3,000 £4,200 £6,000

Source: Checkatrade driveway cost guide, April 2026. Figures are averages, not quotes.

The extras

  • Breaking out old concrete or tarmac: labour and skip hire. Thick concrete takes longer.
  • Sub-base depth: soft or clay ground needs more digging and more stone.
  • Drainage: a channel drain and soakaway if the surface is not permeable.
  • Edging and borders: often included, but check.
  • Steps, walls and gates: priced separately.
  • Dropped kerb: about £1,800 for a new crossing or £1,100 to widen, on 2026 UK averages (Checkatrade).

Worked examples

These use the averages above. Your quote will differ.

Home Job Rough budget
Post-war semi, Roseberry 30m² block paving in the front lawn, new crossing £3,000 drive + about £1,800 crossing
1960s semi, Low Grange 35m² tarmac, crossing across a verge £3,150 drive + crossing priced by the council
Detached, High Grange Re-lay and widen to 50m² in resin, wider crossing £6,000 drive + about £1,100 widening
Cottage, Wolviston 20m² gravel with sett edge in a conservation area £1,200 drive + any planning fee

Comparing quotes

Ask each installer to state:

  1. the dig-out depth and sub-base thickness;
  2. the exact surface product and colour;
  3. the edging and how it is fixed;
  4. how water will drain;
  5. who is responsible for the crossing, and whether they hold the council's Opening Up licence if they are doing it.

A cheaper quote with a thin sub-base often costs more in the end.

Common questions

Why do quotes vary so much?

Mostly because of what is underneath: dig-out depth, sub-base and drainage.

Is VAT included?

Ask. Some quotes are given ex-VAT.

Does a bigger drive cost less per m²?

Usually, because set-up costs are spread across more area.

Should I pay a deposit?

A modest deposit for materials is common. Avoid paying the full amount upfront.

Ready to price up your drive?

Free, no-obligation quotes across Billingham, Wolviston and Cowpen Bewley.

Get a free quote